What is ANDI SafeAir?

andi safeairANDI coined the term “SafeAir” in reaction to many incorrect assumptions that surround the use of  “nitrox”.  Often dismissed as a marketing gimmick by the uninformed, SafeAir is much more than just plain ‘nitrox’.

ANDI SafeAir is the epitome of proper breathing gas handling at all stages: from the compressor pre-filter to the divers’ second stage mouthpiece.

ANDI SafeAir production begins with properly trained staff operating a properly-engineered gas production system. Breathing gas is stored in correctly rated, designated oxygen-cleaned receivers. The staff follow proper gas-handling protocols using “oxygen-service” equipment to mix the purest breathing gas with oxygen in accordance with the ANDI-developed standard for “Oxygen-compatible-Air”.

Only “Oxygen-compatible-Air” is used in the production of  ANDI SafeAir, not “Grade E” which is the worst breathing gas standard in the entire world. The gas system’s product is analyzed quarterly by an independent, federally-licensed testing laboratory. ANDI receives a copy of the report to document that the ANDI facility meets the highest standards in the industry.

In addition, all gasses are analyzed by the end-user. As a result of these procedures, ANDI maintains that SafeAir IS SAFER than normally produced breathing air.

In summary, SafeAir as definied by ANDI, is any Oxygen-Enriched Air mixture with O2 concentrations between 22% and 50% that meet ANDI’s gas quality and handling specifications. Many ANDI Regional HQ’s refer to Oxygen Compatible Air as “SafeAir 21”.

If it is not ANDI SafeAir, it is only Nitrox – and there are no guarantees of safety.

The ANDI SafeAir gas quality specification is listed in the Appendix of most ANDI texts. The ANDI training programs teach the practical application of these mixtures for recreational/sport and technical situations.

Remember, it may be Nitrox, but if it’s not ANDI, it’s not SAFEAIR

Comments are closed.